Kawasaki Vulcan 750 1998 Routing throttle cables?

hook up the throttle into the carbs the outside of the cable you can run under the gas tank out to the front on the right side since the black sheath does not move make sure the cable is not twisted or binding too sharp around a corner go out the front to the side of the triple clamps loop up and then back to the throttle on the bars. The cable inside the sheath moves. as long as the sheath is not pinched between something or touching the exhaust and is clear of getting caught by turning the handle bars it should be fine. The reason there are no explicit directions is it is not that hard to do, there may even be clips along the tank or frame, or it may just lay upside the wire harness going down the center tube. You can always go to a dealer and talk to the parts guy, thats how I get tons of fee info, go down, buy a quart of oil or something and ask the parts guy a question in the process. Simple easy, good way to get info. use common sense when routing the cable no tight curves and leave some slack out in front of the bars so you can turn and not affect the throttle cable.